Class 100 Ultraviolet Lamps Desktop Laminar Flow Clean Bench Lab Operating
Laboratory operating table scientific research desktop laminar flow cabinet with ultraviolet lamps
Introduction:
All materials used in this lamianr flow cabinets hood/ work station are selected for durability and contamination control. Interior surfaces, including the side panels and work surface, are 304 stainless steel; on an optional basis, these components can be electropolished to provide an ultra-clean finish free of subsurface contaminants. The
exterior features a chip-resistant, powder-coated finish. The display panel, including the ON/OFF switch,
pressure gauge, and blower speed control, is mounted above the work area. For operational
convenience, a duplex 220VAC/50Hz power outlet is included on a standard basis.
Operating features:
1: Powerful filter/blower filter/fan modules provide a back-to-front laminar flow of filtered air across the work surface.
2: The adjustable multi-speed, direct-drive blower lets you adjust air speed to meet your requirements.
3: Horizontal air laminar flow cabinet/laboratory clean hood adopts wind volume adjustable fan system,
light-touch type switch and dual-speed voltage regulation device to keep wind speed in working area in ideal state.
4: Horizontal air laminar flow cabinet hood /laboratory clean hood adopts super thin type air filter which reduces static-pressure tank to the smallest size.
5: Horizontal air laminar flow cabinet hood / laboratory clean hood is the newest type bench in present market.
The front cover may be opened directly for exchanging filter.
6: American Dwyer pressure remind of you replace the ULPA Air filter in regular.
7: It also provides an industry-best low noise level of 50dBA.
|
Model
|
VD650
|
HD650
|
VD850
|
HD850
|
|
Inner Size
|
480*480*450
|
480*450*450
|
680*470*450
|
680*450*450
|
|
Outer Size
|
620*520*820
|
620*520*820
|
820*520*820
|
820*520*820
|
|
Suitable
|
sigle person single side
|
|
Air Filter Numbers
|
480*460*38*1
|
680*460*38*1
|
|
Cleanliness Level
|
class 100 purification,FED STD 209E.≤3.5 particles for 0.5um micro dust
|
|
Average Air Speed
|
0.25- 0.4 m/s adjutable
|
|
Power
|
AC/220V/50HZ
|
|
Noise
|
≤62dB(A)
|
|
Weight
|
about 48 kgs
|
about 65 kgs
|
